If you need a new shingle roof in Streeter, here's what matters: fiberglass mat construction with ceramic granulated coating for UV protection and fire rating. Architectural shingles carry a Class A fire rating and wind resistance ratings up to 130 mph. Streeter Roofing & Maintenance helps you pick the right shingle for your home and budget.
Every shingle roof starts with the layers beneath the shingles. Synthetic underlayment rolls across the entire roof deck as the primary waterproof barrier. Ice-and-water shield goes down in the valleys, along the eaves, and around every penetration — chimney flashing, pipe boots, vent boots. Drip edge along every eave and rake directs water into the gutters instead of behind the fascia.
Our Shingle Roofing Process
Shingle Selection
Free on-site inspection. We measure, assess your roof deck condition, and walk you through architectural vs. three-tab shingles with realistic pricing. No pressure, just facts.
Strip & Inspect
Old roof stripped to bare deck. We inspect the plywood or OSB sheathing for structural integrity, replace any compromised boards, and prep a clean, solid substrate for the new underlayment and shingles.
Ice Shield & Drip Edge
Synthetic underlayment across the full roof deck. Ice-and-water shield in valleys, along eaves, and around chimney flashing, pipe boots, and vent boots. New drip edge installed at every eave and rake. Step flashing and counter-flashing at all wall transitions.
Nailing & Overlap
Starter strips along the eave, then field courses of architectural shingles with manufacturer-specified offset and overlap. Each shingle nailed in the designated zone with 4-6 fasteners. Ridge cap shingles hand-nailed at every hip and ridge for a finished, watertight top.
What Streeter Customers Say
"We called expecting to wait days, but they were here the same afternoon. Fair pricing, quality work, and they kept us informed every step of the way."
"Best experience we've ever had with a home service company. On time, on budget, and the results exceeded what we expected. Truly top-notch."
"Our neighbors recommended them and now we understand why. Meticulous attention to detail and they treated our home like it was their own."
Why Choose Streeter Roofing & Maintenance for Shingle Roofing?
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.
Full Tear-Off Standard
We strip to the deck on every shingle job. No overlay shortcuts. Your underlayment, ice-and-water shield, and flashing are installed on a clean, inspected roof deck.
Nailed to Manufacturer Spec
Every shingle nailed in the designated nailing zone with the correct number of fasteners. This is what keeps the manufacturer warranty valid and the shingles on your roof in high wind.